4 CAN communication ports
Compatible with CAN specification 2.0A and 2.0B
Fully compatible with the ISO 11898-2 standard
Baud rate : 5 k, 10 k, 20 k, 33.3 k, 50 k, 62.5 k, 83.3 k, 125 k, 250 k, 500 k, 800 k, 1 M bps and user-defined
CAN bus filter is configurable
100 data frames buffer for each CAN channel
Max data flow up to 2500 fps for all CAN channel
Selectable baud rate by rotary switch
Selectable 120Ω terminator resistor by DIP switch
LED for CAN reception and transmission
Support CAN network with star or tree topology
Extending the CAN bus distance to expand the CAN network size
Integrating different CAN network with different baud rate
Compatible with CAN specification 2.0A and 2.0B
Fully compatible with the ISO 11898-2 standard
Baud rate : 5 k, 10 k, 20 k, 33.3 k, 50 k, 62.5 k, 83.3 k, 125 k, 250 k, 500 k, 800 k, 1 M bps and user-defined
CAN bus filter is configurable
100 data frames buffer for each CAN channel
Max data flow up to 2500 fps for all CAN channel
Selectable baud rate by rotary switch
Selectable 120Ω terminator resistor by DIP switch
LED for CAN reception and transmission
Support CAN network with star or tree topology
Extending the CAN bus distance to expand the CAN network size
Integrating different CAN network with different baud rate
Hardware | Controller：High Performance Microcontroller RTC (Real Time Clock)：No Watchdog：Watchdog IC ESD Protection：4 kV Contact for each channel |
CAN Interface | Transceiver：NXP TJA1042 Channel number：4 CAN Connector：9-pin male D-Sub with CAN_GND, CAN_SHLD, CAN_H, CAN_L CAN Specification：ISO-11898-2, CAN 2.0A and CAN 2.0B Baud Rate (bps)：5k, 10 k, 20 k, 33.3 k, 50 k, 62.5 k, 83.3 k, 125 k, 250 k, 500 k, 800 k, 1 M bps and user-defined Baud Rate Selection：Selectable by rotary switch Isolation：3000 VDC for DC-to-DC, 2500 Vrms for photo-couple Terminator Resistor：Selectable 120Ω terminator resistor by internal jump Transmission Distance (m)：Depend on baud rate (for example, max. 1000 m at 50 kbps ) CAN Filter：Configurable by user |
UART Interface | RS-232：1 port (for configuration) RS-232 Connector：9-pin screwed terminal block (TxD, RxD, GND ) |
LED | Round LED：CAN status LED x 4 , Power LED x 1 |
POWER | Input range：Unregulated +10 ~ +30 VDC Power Consumption：1.5W |
Mechanism | Installation：Wall-Mounting Casing：Aluminum metallic case Dimensions：116.5 x 127 x 61.3 mm (W x L x H) |
Environment | Operating Temp：-25 ~ 75 ℃ Storage Temp：-30 ~ 80 ℃ Humidity：10 ~ 90% RH, non-condensing ESD protection：4 kV Contact for each channel EFT protection：500V for signal, 1000V for power EMI certification：30M ~ 1G pass Hi-pot protection：1kV pass Surge protection：1kV pass |
可选型号 | ||
| 产品编号 | 描述 |
| I-5534-M | 4-port CAN bus Switching with metal casing |