Digital Input

Input Channel：6

Input Type：Isolated, Wet Contact (Sink/Source)

Input Level

On Voltage Level: +3.5 VDC ~ +30 VDC

Off Voltage Level: +1 VDC Max.

Input Impedance

3 kΩ, 0.33 W

Counters

Channels: 6

Max. Count: 16-bit (65535)

Max. Input Frequency: 100 Hz

Min. Pulse Width: 5 ms

Relay Output

Output Channel：4

Output Type：Power Relay, Form A

Contact Rating：5 A @ (250 VAC/30 VDC)

Max. Contact voltage：270 VAC/125 VDC

Operate Time：10 ms Max. at rated voltage

Release Time：5 ms Max. at rated volta

Endurance

Electrically：Resistive Load: 100,000 ops. min. (10 ops/minute)

Mechanically：At No Load: 20,000,000 ops. min. (300 ops/minute)

Dielectric Strength

Between Contacts：750 VAC for 1 minute

Between Coil to Contacts：3,000 VAC for 1 minute

Insulation Resistance：5,080 V (1.2/50 μs)

Surge Strength：5 ms Max. at rated voltage

ESD Protection：+/-4 kV Contact for Each Channel

可选型号

产品编号

描述

ZB-2060-T CR

Wireless 6-ch Isolated Digital Input and 4-ch Relay Output Module (RoHS)

Important Note: The Zigbee Data Acquisition modules need a Zigbee host converter to coordinate the data transmission route. Please remember to order a ZB-2550, ZB-2550-T, ZB-2550-PA, ZB-2570, ZB-2570-T or ZB-2570-PA ZigBee host converter when you purchase the Zigbee Data Acquisition Products.

可选附件

产品编号

描述

MDR-20-24

24 VDC/1.0 A, 24 W Power Supply with DIN-Rail Mounting

ZB-2510-T CR

ZigBee Repeater (RoHS) (CE/FCC)

ZB-2510-PA CR

High Power Amplifier ZigBee Repeater (RoHS)

ZB-2550-T CR

RS-485/RS-232 to ZigBee Converter (Host) (RoHS)

ZB-2550-PA CR

RS-485/RS-232 to High Power Amplifier ZigBee Converter (Host) (RoHS)

ZB-2570-T CR

Ethernet/RS-485/RS-232 to ZigBee Converter (Host) (RoHS)

ZB-2570-PA CR

Ethernet/RS-485/RS-232 to High Power Amplifier ZigBee Converter (Host) (RoHS)