2通道电压输出/4通道模拟量输入/2通道数字输出
产品认证
ZB-2026-T,2通道电压输出/4通道模拟量输入/2通道数字输出
ISM 2.4 GHz Operating Frequency
Fully Compliant 2.4 G IEEE802.15.4/ZigBee Specifi cations
Wireless Transmission Range up to 700 m (PA-Version)
Wireless Transmission Range up to 100 m (T-Version)
GUI Configuration Software (Windows Version)
4 AI, 2 AO, 2 DI and 2 DO
Individual Channel Confi guration
Overvoltage Protection is up to 240 Vrms
Surge and ESD Protection
DIN-Rail Mountable
ISM 2.4 GHz Operating Frequency
Fully Compliant 2.4 G IEEE802.15.4/ZigBee Specifi cations
Wireless Transmission Range up to 700 m (PA-Version)
Wireless Transmission Range up to 100 m (T-Version)
GUI Configuration Software (Windows Version)
4 AI, 2 AO, 2 DI and 2 DO
Individual Channel Confi guration
Overvoltage Protection is up to 240 Vrms
Surge and ESD Protection
DIN-Rail Mountable

Analog Input

Input Channel:4 Differential

Input Type:+/-10 V, +/-5 V, +/-1 V, +/-500 mV, +/-150 mV, -20 mA ~ +20 mA (Requires Optional External 125 Ω Resistor)

Resolution:16-bit

Sampling Rate:10 Samples/Second (Total)

Accuracy:+/-0.1% of FSR

-3dB Bandwidth:15.7 Hz

Zero Drift:+/-20 μV/°C

Span Drift:+/-25 ppm/°C

Common Mode Rejection:86 dB

Normal Mode Rejection:100 dB

Input Impedance:>2 MΩ

Overvoltage Protection:240 Vrms

Individual Channels Confi gurable:Yes

Analog Output

Output Channels:2

Output Type:+/-10 VDC, +/-5 VDC, 0 ~ 10 VDC, 0 ~ 5 VDC

Resolution:12-bit

Accuracy:+/-0.1% of FSR

Zero Drift:+/-30 μV/°C

Span Drift:+/-25 ppm/°C

Programmable Output Slope:0.0625 ~ 512 V/Second

Voltage Capability:20 mA @ 10 V

Power-on and Safe Value:Yes

Digital Input

Input Channels:2 (Sink)

On Voltage Level:3.5 VDC ~ 50 VDC

Off Voltage Level:1 VDC max.

Input Impedance:10 KΩ

Event Counters

Channels : 2

Max. Counts: 16-bit (65535)

Max. Input Frequency : 50 Hz

Min. Pulse Width : 10 ms

Digital Output

Output Channels:2 (Sink)

Output Type:Isolated Open Collector

Max. Load Current:700 mA/channel

Load Voltage:+5 VDC ~ +50 VDC

Short Circuit Protection:Yes

可选型号

 

产品编号

描述

 

ZT-2060 CR

Wireless 6-channel Isolated Digital Input and 4-channel Relay Output Module (RoHS)

Important Note: ZigBee Data Acquisition modules need a ZigBee host converter to coordinate the data transmission route. Please remember to order a ZT-2550 or ZT-2570 ZigBee host converter when you purchase ZigBee Data Acquisition Products.

可选附件

 

产品编号

描述

 

MDR-20-24

24 VDC/1.0 A, 24 W 电源带导轨安装

 

ZT-2510 CR

ZigBee 中继器 (RoHS)

 

ZB-2510P CR

High Power Amplifier ZigBee Repeater (RoHS)

 

ZB-2010-PA CR

High Power Amplifier ZigBee Repeater (RoHS)

 

ZT-2550 CR

RS-485/RS-232ZigBee 转换器 (主站)

 

ZB-2550P CR

RS-485/RS-232 to High Power Amplifier ZigBee Converter (Host) (RoHS)

 

ZB-2550-PA CR

RS-485/RS-232 to High Power Amplifier ZigBee Converter (Host) (RoHS)

 

ZT-2570 CR

Ethernet/RS-485/RS-232ZigBee 转换器 (主站) (RoHS)

 

ZB-2570P CR

Ethernet/RS-485/RS-232 to High Power Amplifier ZigBee Converter (Host) (RoHS)

 

ZB-2570-PA CR

Ethernet/RS-485/RS-232 to High Power Amplifier ZigBee Converter (Host) (RoHS)